Resources / Slings

HMPE (Dyneema) vs Polyester vs Wire Rope Slings: Which to Use

High-performance polyethylene (HMPE) slings, often known by the Dyneema® brand fiber, can lift what a wire rope sling lifts at a small fraction of the weight. Polyester round slings are the everyday standard, and wire rope is the old workhorse. Here's how the three compare, and when each one is the right call.

Quick answer: choose HMPE when weight, stretch or buoyancy matter: heavy lifts with small crews, precision placement, marine work. Choose polyester for low-cost everyday lifts on finished loads. Choose wire rope where abrasion, rough handling or high heat would wreck a synthetic sling.

What is HMPE?

HMPE (high modulus polyethylene), also called UHMWPE, is a super-strong polyethylene fiber. Dyneema® is the best-known brand. Pound for pound it's among the strongest fibers made, it barely stretches, and it floats. Those traits make it ideal for lifting slings, as long as you respect its limits on heat, cutting and sustained loads.

HMPE vs polyester vs wire rope slings

HMPE sling Polyester round sling Wire rope sling
Weight Lightest. Slingmax ONYX is under half the weight of an equal polyester roundsling and under 10% of a comparable multi-part wire rope sling Light, but bulky at high capacities Heaviest
Stretch at rated load Under 1% Several percent Low
Floats Yes No No
Heat limit About 180°F (check the tag) About 194°F (Slingmax covers 180°F) 180°F fiber core, 400°F steel core
Cut and abrasion Needs edge protection Needs edge protection Most resistant
Long static loads Can creep under sustained load Fine Fine
Gentle on finished loads Yes Yes No
Inspection Cover warning layers or Check-Fast® on some models Visual and by hand Broken wires are visible
Cost Highest Lowest Moderate

Where HMPE slings win

  • Weight. A heavy-capacity HMPE sling one person can carry replaces a wire rope sling that needs a forklift or two riggers.
  • Precision. With under 1% stretch, loads don't bounce or settle, which helps when setting equipment on bolts or balancing multi-leg picks.
  • Marine and subsea. HMPE floats and isn't affected by seawater.
  • Finished loads. Like polyester, it won't mar painted or machined surfaces.

Where HMPE needs care

  • Heat. Polyethylene softens at relatively low temperatures. Keep HMPE slings below their rated limit, about 180°F, and away from welding.
  • Edges. Like every synthetic, it cuts on sharp edges. Use a sleeve or pad every time. See our sling protection guide.
  • Creep. Under a load held for a long time, HMPE slowly stretches. Slings are for lifting, not for holding loads in place for days.
  • Cost. It's the most expensive option up front.

HMPE and high-performance slings at Elko

  • ONYX roundslings use a 100% HMPE core with a black outer and red inner jacket. When the red shows, the sling comes out of service.
  • Helix™ roundslings use Slingmax's K-Spec® core inside a braided HMPE jacket. They're very slim (about 1.5 inches at 50,000 lb), neutrally buoyant and rated up to 200,000 lb.
  • Twin-Path® and Single-Path® slings use K-Spec® high-performance core yarn with Check-Fast® inspection.

Compare them all on our Slingmax page.

When polyester or wire rope is still better

  • Polyester round slings are the right call for light and medium everyday lifts where cost matters more than weight or stretch.
  • Wire rope slings are the right call for rough, abrasive jobs, scrap and steel handling, and heat above what synthetics can take. See our wire rope sling capacity chart.

Find the right sling for the job

Elko Wire Rope is an authorized Slingmax distributor and builds wire rope slings in-house, with branches in Salt Lake City, Elko, Phoenix and Safford. Tell us the load, the lift and the environment, and we'll recommend the sling that fits, not just the most expensive one.

Get a sling recommendation

HMPE vs Polyester Sling FAQs

Is Dyneema the same as HMPE?

Dyneema® is a brand of HMPE (high modulus polyethylene) fiber. HMPE slings may use Dyneema® or another maker's HMPE.

Are HMPE slings stronger than wire rope?

Pound for pound, yes, by a wide margin. At the same rated capacity an HMPE sling is a small fraction of the weight of a wire rope sling.

Do HMPE slings float?

Yes. HMPE is lighter than water, which makes it popular for marine and subsea lifts.

What temperature can an HMPE sling handle?

About 180°F for most high-performance slings. Always check the tag. For hot work, use a heat-rated sling like the Sparkeater®, or chain.

Why are HMPE slings so expensive?

The fiber costs far more to make than polyester. The payoff is lighter rigging, less stretch and faster lifts.

Keep reading